• size range: 1/2”-12”, DN15- DN300
• pressure rating: Class150- Class600, PN16-PN100
• cast steel body material: WCB, CF8, CF8M, CF3, CF3M
• forged steel body material: A105, LF2, F304, F316
• seat: PTFE, RPTFE, TMF1600 PEEK, NYLON, DEVLON, MO- LON
• Applicable temperature: -60°C to 260°C
• Operation: Handle, handwheel, turbine box, electric head, pneumatic head
Allied Attachments encompasses a full line of hydraulic hammers, with thirteen (13) models ranging from 550 to 14,000 ft-lb machines.
Allied Attachments encompasses a full line of hydraulic hammers, with thirteen (13) models ranging from 550 to 14,000 ft-lb machines.
Allied Attachments encompasses a full line of hydraulic hammers, with thirteen (13) models ranging from 550 to 14,000 ft-lb machines.
AB408 Hydraulic Hammer – Power through material with 380-110 BPM impact rate and a 800 ft/lb. energy class rating. Box style mounting dampens vibrations and quiets operation. Oversized through bolts avoid loosening. Suitable for skid steer mounting.
features and first-class Allied PBS support, these hammers will provide the highest performance and durability. Learn more about our hammers.
Allied Attachments encompasses a full line of hydraulic hammers, with thirteen (13) models ranging from 550 to 14,000 ft-lb machines.
Apron Feeder Specifications
The Series 226 direct acting sole- noid valve can be used with both liquids and gases in analytical and medical devices Multiple electrical connection op- tions offer greater flexibility in OEM instrument design and serviceability Meets all relevant CE directives, and is RoHS compliant Typical applications include:
Flomax Fuel Nozzles connect to all standard fuel receivers. The FN600 fuel nozzle has latching dogs and the FNBL fuel nozzle uses a ball lock design. Both nozzles come with an optional ball bearing 1 1⁄2” NPT swivel. An available plug is specially designed to seal out dirt and contaminants and is attached with a S/B 1/8′′ coated wire lanyard. A patented removable piston assembly allows the cylinder to be easily removed for rebuilding. Nozzles can be performance adapted to specific user requirements.
• FNBL Diesel Fuel Nozzle
• Nozzle Length: 11 inches
• Nozzle Weight: 6.6 lbs
• Nozzle Swivel Thread: 1.5 NPT
• Standard shutoff set at 8.0 PSI (FloMAX nozzles can be set from 5.5 PSI shutoff to 13.00 PSI shutoff as required) Working pressure – 125 PSI Burst pressure – 250 PSI
Ball Valves with trunnions help maintain consistent flow rates for high capacity, heavy-duty applica- tions. They have a rotatable ball with a cylindrical flow passage through the center to the con- trol flow. When the ball is turned one-quarter of the way, the flow stops. The port of a full-port or full- bore ball valve equals the pipeline diameter and presents little or no restriction to flow to allow for pig- ging when not attenuated.
• Size range: 2”-18”, DN50- DN450
• Pressure rating: Class150- Class300, PN10-PN40
• Body material: WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, CN7M
• Internal parts material: F6a, F304, F304L, F316, F316L, F51, Monel
• Applicable temperature: -29 ° C to 350 ° C
Belt feeders are designed to carry material across longer distances, and they are able to extract material from bins and hoppers via a loading chute. Belt feeders allow for volumetric control of materials, but they cannot be used in operations which require an extremely low rate of material flow.
ATEX
This product is only intended for use in large-scale fixed installations excluded from the scope of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2).
ATEX
This product is only intended for use in large-scale fixed installations excluded from the scope of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2).
ATEX
This product is only intended for use in large-scale fixed installations excluded from the scope of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2).
ATEX
This product is only intended for use in large-scale fixed installations excluded from the scope of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2).
ATEX
This product is only intended for use in large-scale fixed installations excluded from the scope of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2).
Hydraulic Hammer and Breakers are an essential tool for many demolition and excavation projects. At Allied, we carry attachments in our warehouse for quick delivery. Learn tips to extend your breakers life.
The FloMAX Bulk Fuel Nozzle has been designed to transfer large volumes of fuel at high flow rate using existing standard 1 1⁄2” fuel receivers. While best results will be obtained using a FloMAX FRA, FRS, or FR-RS fuel receiver, the BFN is completely compatible with all industry standard fuel receivers.
The BFN has a push-to-connect design that releases from the receiver with a gentle pull on the pullback or the poly coated stainless steel lan- yard. This is a dry break nozzle that uses the same poppet and vulcanized Viton seal valve sleeve as the FloMAX FN600 and FNBL fuel nozzles. The BFN is an excellent option when high fuel flow is required, but auto shutoff isn’t. The FRX-BFN connects to the FRX 2′′ fuel receiver. It has all the same design features as our standard BFN.
DN50 – DN300
Approved for pressures up to 16 bar
Dimensions, materials, design pressure and tightness adapted to customer´s requirements Actuators: Pneumatic, Electric, Hydraulic
• Size range: 2”-60”, DN50- DN1500
• Pressure class: Class150- Class2500, PN10-PN420
• Body material: WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, CN7M
• Internal material: F6a , F304, F304L, F316, F316L, F51, Monel
• temperature: -196°C to 600°C
• Size range: 2”-36”, DN50- DN900
• Pressure class: Class600- Class2500, PN100-PN420
• Body material: WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, CN7M
• Internal material: F6a , F304, F304L, F316, F316L, F51, Monel
• Temperature: -196°C to 600°C
From DN150 to DN2000.
Larger sizes on request.
The differential pressure (ΔP) these valves can work at is highly variable, which is why design is in accordance with the requirements in each specific project. They can be designed to withstand high pressures.
DN50 a DN1200
Larger sizes on request.
Rotork is independent of valve manufacturers allowing us to work with a wide variety of valve makers and manufacturers worldwide.
Greater impulse action works together with the carrier’s downward forces to compact cohesive soils. The result is faster, safer, more efficient compaction than other attachments. Learn more our compactors.
The CVA range of linear and quarter-turn actuators provide an electrically powered process control operator suitable for most control valve types and sizes. The CVA sets a new standard for process control and valve actuation.
Rotork has proven expertise in applying new technologies in the automation of valves to bring enhanced performance and innovative features. This philosophy has now been applied to a new range designed specifically for the exacting demands of process control, specfically continuous modulating control valve applications.
Using the combination of advanced actuator engineering and process control experience, plus specification input from major control valve end users, Rotork has produced a range of control valve actuators that are unique in the industry and provide solutions to many common control issues.
From 125 x 125 up to 3000 x 3000
Larger sizes on request.
Check with CMO Valves for the general dimensions of a specific damper.
Maximum standard work pressure is 0.5 bar ; greater pressures upon request.
From DN 150 up to DN 3000
Larger sizes on request.
Check with CMO Valves for the general dimensions of a specific damper.
From DN 80 up to DN 3000
Larger sizes on request.
Check with CMO Valves for the general dimensions of a specific damper butterfly.
From DN 80 up to DN 3000
Larger sizes on request.
Check with CMO Valves for the general dimensions of a specific damper butterfly.
The most significant difference between the ML and MF series is the differential working pressure (ΔP).
For lower pressures, choose the ML series (Light Butterfly);
For higher pressures, choose the MF series.
Maximum standard work pressure is 0.5 bar greater pressures upon request.
• Working Pressure :300PSI or PN16
• Working Temperatre: 0°C to 68°C for electrical signals 4.4°C to 68°C for wet lead nozzle pipe
• Corrosion Protection :Internal-ly and externally liquid epoxy painting or fusion bonded ep- oxy powder coated(FBE)
Eccentric Plug Valves combine globe valve ruggedness with the efficiency of a rotary valve so they’re also referred to as rotary globe. They have a plug-shaped,- flow-restricting member that follows an eccentric path as it rotates.
• Size range: 1/2”-2”
• Pressure rating: Class150- Class2500
• Body material: A105, LF2, F304, F316, F11, F22, F5
• Internal material: F6a, F304, F304L, F316, F316L, F51, Mo- nel
• Applicable tempera- ture: -29°C to 550°C
Designed for fail open/close oper- ations in emergency conditions. Compliant with all open bus pro-
tocols, with PST capability. SIL 3 rated, suitable for ROSOV (remote operated shut-off valves).
Vous êtes à la recherche des filtres à air les plus performants pour vos équipements ?
Les systèmes de filtration d’air HIFI FILTER® répondent aux exigences des environnements les plus extrêmes et assurent une efficacité de séparation de près de 100 %. Protégez votre moteur et allongez les intervalles entre chaque maintenance.
Avec HIFI FILTER® vous disposez d’une large gamme de filtres à visser, complets, panneaux et cartouches. Compatibles avec vos équipements et process, ils sont disponibles dans différents types médias et seuil de filtration.
Gagner en puissance et en couple avec la gamme de filtres à air hautes performance H-AIR FILTER®.
Grâce à leur média en coton, les filtres à air H-AIR FILTER® permettent un passage d’air plus élevé que les filtres cellulose traditionnels. Par ailleurs, la combinaison des 4 couches en fibre de coton huilé assure une qualité de filtration optimale. Lavable et réutilisable, les filtres à air H-AIR FILTER® vous offre une durée de vie généralement égale à celle de votre véhicule.
Aussi disponibles dans la gamme H-AIR, les filtres à huile pour moteur de compétition.
Rotork has the experience, know-how and product range to deliver virtually any actuation solution. Rotork products have long been chosen for their reliability and performance. Whilst these proven characteristics are certain under normal operating conditions, there are conditions that not even a standard Rotork actuator can operate in fire.
Fire and explosion is a major cause of concern to refinery, gas processing, petrochemical and offshore installations. Danger and damage from fire can be minimised by the efficient and effective protection of the systems, which control the plant.
For this reason Rotork can recommend a range of fire proofing options for it’s actuators, ranging from fixed passive protection through to full fire retardant enclosures.
• Working Pressure :16 bar
• Working Temperatre :-10°C to 120°C for EPDM liner. -10°C to 82°C for NBR liner.
• Corrosion Protection :Internal- ly and externally liquid epoxy painted or fusion bonded ep- oxy powder coated (FBE).
• Size range: 1/2 “-16”, DN15- DN400
• Pressure rating: Class150- Class900, PN10-PN64
• Body Material: WCB, CF8, CF8M, CF3, CF3M, CF3M
• Temperature : -10°C to 180°C
Flomax 3/4′′ Series connectors consist of 6 color-coded non-interchangeable nozzle and receiver sets. The proprietary design helps prevents cross-contamination of fluids of non-mating connectors. The connectors are manufactured using 100% metal components. All wear components are stainless steel and the non-wear components are aircraft grade anodized aluminum. The billet aluminum caps are O-Ring sealed for greater contaminant resistance.
• 200 psi working pressure
• 500 psi burst pressure rated
• Maximum flow rate of 45 gpm at 70 PSI
Flomax High Flow Series connectors consist of 7 color-coded non-interchangeable nozzle and receiver sets. The proprietary design helps prevents cross-contamination of fluids of non-mating connectors. The connectors are manufactured using 100% metal components. All wear components are stainless steel and the non-wear components are aircraft grade anodized alumi- num. The billet aluminum caps are O-Ring sealed for greater contaminant resistance.
• Maximum flow rate of 113 gpm (using ISO 46 hydraulic oil)
• 500 psi working pressure
• 1500 psi burst pressure rated
• 1′′ NPT male & female threaded connectors
Flomax Standard Series Coolant and Engine con- nectors are fully compatible and interchangeable with industry standard connectors. The caps, plugs, and connectors are 100% metal, manu- factured using aircraft grade anodized aluminum and stainless steel. The color-coded and labeled mating components provide for quick positive identification.
| The Poly-Guard® Series External Gear Pump has a rugged Stainless Steel body lined with a chemically-resistant fluoropolymer and contains all non-metallic internal components. This makes the Poly-Guard an excellent choice for pumping highly corrosive inorganic acids, alkalis and salts, as well as for high-purity services, where contact with metallic components must be avoided. The Poly-Guard is available in 9 sizes with capacities ranging from 1.4 to 25 GPM mag-drive |
• Working Pressure :16 bar for EN13789 valves. 200 PSI for MSS SP-85 valves.
• Working Temperatre :-10°C to 120°C
• Corrosion Protection :Internal- ly and externally liquid epoxy painted.
Globe Valves use a linear motion to move a closure member into and out of a seating surface. They have a body distinguished by a globular-shaped cavity around the port region. Many single-seated valve bodies use cage or retainer-style constructions to re- tain the seat ring, provide valve plug guiding, and provide a means for es- tablishing particular valve flow char- acteristics.
• Working Pressure :16 bar
• Working Temperatre :-10°C to 120°C for EPDM liner. -10°C to 82°C for NBR liner.
• Corrosion Protection :Internal- ly and externally liquid epoxy painted or fusion bonded ep- oxy powder coated (FBE).
GT Range single- and double-acting pneumatic piston actuators.
Design
Action
Stroke adjustment
Torques
Air pressure
Supply
Materials
Approvals and Industry Standards
GTS Range single- and double-acting pneumatic piston actuators
Design
Action
Stroke adjustment
Torques
Air pressure
Supply
Materials
Approvals and Industry Standards
See GTS literature page for further details
RPD-RPS rack & pinion actuators offer a reliable, easy and cost effective solution, providing max- imum torque output with mini- mum supply pressure. The hous- ing can be ductile iron or carbon steel; all other parts are in carbon steel as a minimum.
RPHD and RPHS hydraulic actuators are suitable for high pressure applications and on/off or modulating heavy duty service.
Solid 316 SS or Titanium Body The Max-Series heavy duty shaft and bearing design make it last even when operating at high differ- ential pressures for extended lengths of time. Its solid construc- tion and oversized heavy duty bolts will minimize pump distortion caused by piping misalignment. The pump mounting bracket is made of corrosion resistant 316 SS or sturdy Cast Iron.
The Max-Series pumps feature helical gears and relieved wear plates for smoother and quieter operation and intrinsic reduction of gear separa- tion forces. Their unique and durable design will assure extended life in highpressure pumping applications. The Max-Series pumps are available in Sealed and Mag-Drive
versions with flows up to 20 GPM and differential pressures up to 350 PSI.
High-Performance Butterfly Valves are used in throttling ap- plications requiring large flow capacities and small installed footprints. They use a rotating eccentric disk to control flow through a pipe. The disk is generally operable through 90 de- grees and provides a linear flow characteristic. These valves have nominal sizes from DN50 to DN1800 (from NPS 2 to 72) and pressure class up to PN420 (CL2500 according to ASME) depending on the model.
Allied Attachments encompasses a full line of hydraulic hammers, with thirteen (13) models ranging from 550 to 14,000 ft-lb machines.
Coupled with exceptional design features and first-class Allied PBS support, these hammers will provide the highest performance and durability. Learn more about our hammers.
• Lightweight, wafer type check valve with face-to-face dimensions according ISO 5752, table 5 long
• High flow capacity featuring a special shaped disc with a large opening angle resulting in high Kv values
• Spring loaded disc for positive shut-off
• Choice of cast iron or stainless steel body types
• Field replaceable O-ring seat
• Internal travel stop prevents the disc from slamming against the pipe
• Excellent low pressure shut-off The standard low pressure shut-off is less than 0.1 bar (10 kPa)
• Replaceable, metal-reinforced seat, completely encapsulated by rubber, isolates
the stem and body from the media and eliminates seat distortion due to high vac-
uum or turbulence.
• Primary stem seal, formed by preloaded contact of disc hub with flatted seat sur- faces, completely isolates stem and body from the line media.
• Secondary stem seal, formed by an engineered interference fit of the stem through the seat, provides additional sealing integrity.
• Rounded, polished disc edge provides full 360 degree concentric seating, minimum flow restriction, lower seating and unseating torques and maximum seat life.
• Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws in the gasket surface and allows use of standard spiral wound gaskets.
• Valve stem designed to API 609 standards is blow-out resistant.
• Seat retaining ring is housed within the flange gasket ID to eliminate potential emission path.
• Face-to-face conforms to MSS SP-68 and can be configured to ISO 5752 short.
• Adjustable packing utilizes unique rocker-shaped gland bridge that compensates for uneven adjustment of gland nuts.
• Extended neck allows for two inches of clearance for insulation.
• Ideal valve for dense slurry and solids applications and wet or dry abrasives.
• Slide through gate design cuts through solids providing consistent operation in the most difficult applications.
• O-port style gate fully protects the seat face in open position, giving you longer service life.
• Will close through a static column of material.
• Fully fabricated from heavy plate and sheet.
• Available in 304, 316 and 317L stainless steel wetted parts or custom designed for your needs using a wide variety of materials including
• MSS face-to-face standard.
• Other special face-to-face dimensions are available.
• Precision machined seat with multiple gate guides.
• Uni-directional shut-off.
• Full operation, leakage and cycling tests.
• Certified test reports on request.
• Positive sealing which is mechanically achieved and does not rely on line pressure assistance.
• Bi-directional shut-off performance.
• Body design options: wafer, lugged or double flanged.
• Suitable for use on end-of-line service (lugged and double flanged).
• Available in 3 design options. Soft seated, fire-safe or metal seated.
Paper Industry
MiningChemical
BumpingFood
IndustryWater treatment
DN50 a DN2000
bigger diameters under request.
DN50 to DN600
(Bigger sizes under request).
From 125×125 to 1400×1400.
Also available in rectangular designs.
Larger sizes on request.
Standard: 0,6 bar
For larger pressures, consult CMO Valves.
DN50 a DN1200
Larger sizes to order.
PN 2,5 to PN 100
Each valve is designed according to work conditions
DN50 a DN1200
(Larger sizes to order)
DN50 a DN1200
Larger sizes on request.
DN50 a DN1500
Larger sizes to order.
The pressures indicated in the table can be used in either of the valve’s two directions.
Standard manufacturing sizes:
From DN50 up to DN1500
Bigger diameters under request.
The pressures indicated in the table can be used in either of the valve’s two directions.
ND80‐3″ to ND900‐36″
(Larger sizes on request).
The pressures indicated in the table can be used in either of the valve’s two directions.
DN50 to DN1500
Bigger sizes under request
The pressures indicated in the table can be used in either of the valve’s two directions.
De DN50-2″ to DN1200-24″
Larger sizes on request.
The mentioned working pressures are just valid for the pressures applied on the direction of the arrow market on the body. As the valve is designed with gate support guides, the valves are able to support a 30% of these pressures from the opposite direction without any damage on them. In these cases, the valves are not 100% water tight. To obtain total water tightness in these conditions, it is necessary to incorporate additional supports.
From DN50 up to DN800
(Larger sizes on request)
Standard manufacturing sizes: From DN50 up to DN600
DN 50 – DN600 = 10 bar
When mounting LE linear thrust units to SA multi-turn actuators, they act as linear actuators, also referred to as linear thrust units.
The following indications serve the purpose of a rough outline. Please refer to the separate data sheets for more detailed infor- mation.
The 4-Series Mag-Drive Gear Pumps were designed for OEM applications such as chemical feed systems. These pumps offer a large selection of materials to cover a wide variety of chemical processing applications. A unique feature of the 4-Series pump is its parallel port connections located on the front of the pump. The 4-Series pumps are available in 316 SS, Alloy-C or Titanium construction and deliver flows up to 3.5 GPM at differential pres- sures up to 100 PSI.
The Mag-drive pump is the ultimate method for handling haz- ardous liquids since it eliminates the need for dynamic seals, which are the most common source of leaks in standard sealed pumps. Mag-drive pumps come standard in close-cou- pled configuration with mounting bracket and outer magnet that will attach to the motor frame size specified when order- ing. These pumps can also be furnished from the factory with any type of motor, variable speed drive or gear reducer.
• Size range: 2”-24”, DN50-DN600
• Pressure rating: Class150- Class2500, PN16-PN420
• Body structure: Two-piece, three-piece casting steel body material: WCB, CF8, CF8M, CF3 , CF3M, two-way stainless steel, Inconel forged body ma-
terial: A105, LF2, F304, F316 , F51, two-way stainless steel, Inconel
• temperature: -46 °C to 800 °C
• operation : Handle, handwheel, turbine box, electric head, pneu- matic head
Metal to Metal Seat & Disc
125 lbs. WSP at 350 ° Max
200 lbs. WOG
100% Pressure Tested
Threaded Ends
Rising Stem.
Swivel Disc Holder
Model 125T Globe Valve
125 WSP at 350° Max
200 WOG
100% Pressure Tested
Threaded Ends
Rising Stem
Swivel Disc Holder
PTFE Disc
Integral Seat
Metal to Metal Seat & disc
125 lbs. WSP at 350 ° Max
200 lbs. WOG
100% Pressure Tested
Threaded Ends
Rising Stem
Swivel Disc Holder
*Contains lead. Angle valve not for use in water systems intended for human consumption*
125 WSP at 350° Max
200 WOG
100% Pressure Tested
Threaded Ends
Rising Stem
Ductile Iron Hand Wheel
Swivel Disc Holder
PTFE Disc
Integral Seat
*Contains lead. Angle Valve not for use in water systems intended for human consumption*
Flange x Weldable Pipe End
100% Pressure Tested Using Computer Controlled Mass Flow
Zero Leakage Design
Includes Face O-Ring
Includes Valve Cover Plate & Mounting Hardware
Flange x Weldable Pipe End
100% Pressure Tested Using Computer Controlled Mass Flow
Zero Leakage Design
Does Not Include Face O-Ring
Flange x Weldable Pipe End
100% Pressure Tested Using Computer Controlled Mass Flow
Zero Leakage Design
Does Not Include Face O-Ring
Stainless Steel Locking Bolt & Nut for Hand Lever
Flange x Weldable Pipe End
100% Pressure Tested Using Computer Controlled Mass Flow
Zero Leakage Design
Includes Face O-Ring
Flange x Weldable Pipe End
100% Pressure Tested Using Computer Controlled Mass Flow
Zero Leakage Design
Includes Face O-Ring
Stainless Steel Bolt & Nut for Securing Hand Lever
Complies with MSS-SP-80-2013
200 WSP at 406° Max
400 WOG
Non-Shock Service
100% Pressure Tested
Threaded Ends
Rising Stem
Swivel Disc Holder
PTFE Disc
Integral Seat
Max Pressure for Boiler Blow-Off 160 PSI
*Contains lead. Not for use in water systems intended for human consumption*
Care must be taken in blow off piping so that no water hammer effect causes shock to the “Y” blow off valve, especially in cases where a boiler has two blow down lines. In such cases both lines should be piped to a common set of blow down valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.
Model 3050 1/2” Float Valve
Max Inlet Water Pressure 50PSI
Bronze Body
Brass Piston
EPDM Disc & O-Ring
Model 3050FU 1/2” Float Valve
Max Inlet Water Pressure 50PSI
Bronze Body
Brass Piston
EPDM Disc
Max Inlet Water Pressure 50PSI
Bronze Body
Brass Piston
EPDM Disc & O-Ring
Max Inlet Water Pressure 50PSI
Bronze Body
Brass Piston
EPDM Disc
Complies with MSS-SP-80-2013
Class 300
Non-Shock Service
100% Pressure Tested
Threaded Ends
Rising Stem
Swivel Disc Holder
Seat & Disc 400-500 Brinnell Stainless Steel
Max Pressure 390 PSI @ 500 F
Max Pressure for Boiler Blow-Off 312 PSI
Care must be taken in blow off piping so that no water hammer effect causes shock to the “Y” blow off valve, especially in cases where a boiler has two blow-off lines. In such cases both lines should be piped to a common set of blow off valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.
Model 350T Lift Check Valve
Spring-Loaded Lift Check
Complies with MSS-SP-80-2013
300WSP
600 WOG
100% Pressure Tested
Threaded Ends
PTFE Disc
Integral Seat
CRN OCO7135.2C
Model 350TLS Lift Check Valve
Complies with MSS-SP-80-2013
300WSP
600 WOG
100% Pressure Tested
Threaded Ends
PTFE Disc
Integral Seat
CRN OCO7135.2C
| Double Female Complies with MSS-SP80-2013 Class 300 100% Pressure Tested Globe Pattern Rising Stem wihnt Swivel Disc Holder Calibrated “Easy to Read” Gauge with Pointer |
Model 381T Globe Valve
Conforms with MSS-SP80-2013
300 lbs. WSP
600 lbs. WOG
Integral Seat
100% Pressure Tested
Threaded Ends
Rising Stem
Swivel Disc Holder
PTFE Disc
CRN OCO7135.2C
Model 50T Lift Check Valve
Spring Loaded Lift Check
Complies with MSS-SP-80-2013
200WSP at 406° Max
400 WOG
100% Pressure Tested
Threaded Ends
PTFE Disc
Integral Seat
CRN OCO7135.2C
Model 50TLS Lift Check Valve
Complies with MSS-SP-80-2013
200WSP at 406° Max
400 WOG
100% Pressure Tested
Threaded Ends
PTFE Disc
Integral Seat
CRN OCO7135.2C
Class 300
ANSI B 16.34
650 psi Working Steam Pressure @ 500 º F
750 psi @ 100 º F
100% Pressure Tested
Maximum Boiler Blow-Off Pressure 480 psi
Threaded Ends
High Temp. Powder Coating for Corrosion Reistance
CRN OCO7135.2, 24, 25, 26
CRN OEO2171.7, 79, 70, 78, 7AY, 7T, 7N
The United Brass slow opening boiler blow off valve has been designed for the rugged service of boiler treatment and scale. The cast steel knife gate valve conforms to Class 300 of ANSI B16.34 and features a stainless steel seat and disc hardened to Rockwell 60. ASME Boiler and Pressure Vessel Code Sections 1 PG-42.1.12 and Power Piping Code ASME B 31.1 Table 126.1 reference steel valves to ANSI B16.34. The sliding disc provides a cleaning action that keeps the seating area clear of scale and debris.
Model 62 Swing Check Valve
MSS-SP-80-2013
200WSP at 406° Max
400 WOG
100% Pressure Tested
Threaded Ends
CRN OCO7135.2C
*Contains lead. Not for use in water systems intended for human consumption*
Install in horizontal position with cap in upright position. Not recommended for pulsating or vibrating service.
When used on Boiler feed line it is recommended that a #50T spring loaded check valve be used in conjunction with #62 with the #62 located nearest to the boiler and the #50T located nearest to the pump.
Model 62T Swing Check Valve
Complies with MSS-SP-80-2013
200WSP at 406° Max
400 WOG
100% Pressure Tested
Threaded Ends
PTFE Disc
CRN OCO7135.2C
*Contains lead. Not for use in water systems intended for human consumption*
Install in horizontal position with cap in upright position.
Not recommended for pulsating or vibrating service.
Model 63 Swing Check Valve
Complies with MSS-SP-80-2013
300 WSP
600 WOG
100% Pressure Tested
Threaded Ends
CRN OCO7135.2C
*Contains lead. Not for use in water systems intended for human consumption*
Install in horizontal position with cap in upright position.
Not recommended for pulsating or vibrating service.
Model 79 Needle Valve
200WSP at 406° Max
400 WOG
100% Pressure Tested
Threaded Ends
Rising Stem
CRN OCO7135.2C
Double Female Ball Valve
(Complies with MSS-SP110-92)
200 lbs. WSP at 406 ° Max
400 lbs. WOG
100% Pressure Tested
Threaded Ends
Blowout Proof Stem
1/4” – 1/2” Full Flow
3/4” – 2” Large Port Diameters
CRN OCO7135.2C
200 lbs. WSP at 406 ° Max
400 lbs. WOG
100% Pressure Tested
Blow-Out Proof Stem
1/4” – 1/2” Full Flow
3/4” – 2” Large Port Diameters
CRN OCO7135.2C
*Contains lead. Ball valve not for use in water systems intended for human consumption*
200 lbs. WSP at 406 F Max
400 lbs. WOG
100% Pressure Tested
Blow-Out Proof Stem
Stainless Steel Ball
1/4″ – 1/2″ Full Flow
3/4″ – 2″ Large Port Diameters
CRN OCO7135.2C.
Model 81T Globe Valve
Conforms with MSS-SP80-2013
200 lbs. WSP at 406° Max
400 lbs. WOG
100% Pressure Tested
Threaded Ends
Rising Stem
Integral Seat
Swivel Disc Holder
PTFE Disc
CRN OCO7135.2C
300 WSP @ 450 F Max
600 WOG
100% Pressure Tested
Union End Connections
ASME Compliant per B31.1 and Section one, Pg 60 Appendix A18 of ASME Boiler Code
Complete Installation Instructions Are Included With Each Set
*Contains Lead. Not For Use in Potable Water Systems
300 WSP @ 450 F Max
600 WOG
100% Pressure Tested
Union End Connections
ASME Compliant per B31.1 and Section one, Pg 60 Appendix A18 of ASME Boiler Code
Complete Installation Instructions Are Included With Each Set
*Contains Lead. Not For Use in Potable Water Systems
300 WSP @ 450 F Max
600 WOG
100% Pressure Tested
Union End Connections
ASME Compliant per B31.1 and Section one, Pg 60 Appendix A18 of ASME Boiler Code
Complete Installation Instructions Are Included With Each Set
*Contains Lead. Not For Use in Potable Water Systems
300 WSP @ 450 F Max
600 WOG
100% Pressure Tested
Union End Connections
ASME Compliant per B31.1 and Section one, Pg 60 Appendix A18 of ASME Boiler Code
Complete Installation Instructions Are Included With Each Set
*Contains Lead. Not For Use in Potable Water Systems
Maximum Temperature 405°F Max
ASME Tested
National Board Certified
Body Material: Brass
Trim: Bronze
Male Inlet x Female Outlet
Model 99 Swing Check Valve
125 WSP at 350° Max
200 WOG
100% Pressure Tested
Threaded Ends
Metal Disc
Integral Seat
Model 99T Swing Check Valve
125WSP at 350° Max
200 WOG
100% Pressure Tested
Threaded Ends
PTFE Disc
Integral Seat
*Contains lead. Not for use in water systems intended for human consumption*
Not recommended for pulsating or vibrating service.
Do Not Install laying on side.
Keep seat clean.
125WSP at 350°F Max
Install Using V120T Gasket-(not included)
125WSP at 350°F Max
Install Using V120T Gasket-(not included)
125WSP at 350°F Max
Install Using V120T Gasket-(not included)
125WSP at 350°F Max
Install Using V120T Gasket-(not included)
125WSP at 350°F Max
Install Using V120T Gasket-(not included)
MORIN S scotch yoke actuators have a full stainless steel construction, providing maximum corrosion resistance under the harshest ambient conditions.
The MR95 Series is a versatile, compact, high-capacity di- rect-operated regulator capable of solving the toughest pressure control applications. Possible applications include oxygen systems, inert gas systems and corrosive gas service. The regu- lator is available with cryogenic materials, differential pressure control, high temperature and high-pressure optional con- structions.
Smart multi-turn actuator with ad- vanced communication technolo- gy, data management and reliable operation.
2- pc Ball valve investment casting for body and cap full bore threated end: ANSI B2.1, BC21, ISO 7/1 pressure rating: 1000PSI (PN63) Working temperature: -25C + 180C Material: CF8M, CF8, CF3M, WCB Lock device can be chosen.
1- pc Ball valve investment casting for body and cap Reduce bore threated ends: ANSI B2.1, BS21, ISO 7/1 pressure rating: 1000PSI (PN63) Working temperature: -25C + 180C Material: CF8M, CF8, CF3M, WCB
2-PC BALL VALVE(DIN Length) investment casting for body and cap full bore threated end: ANSI B2.1, BC21, ISO 7/1 Length: DIN3202-M3 pressure rating: 1000PSI (PN63) Working temperature: -25C + 180C Material: CF8M, CF8, CF3M, WCB
2-PC FLange Ball Valve investment casting for body and cap full bore flanged ends: ANSI B16.5, Face fo Face: ANSI B16.10 Pressure rating: 150LB, 300LB, 600LB Working temperature: -25C + 180C Material: CF8M, CF8, CF3M, WCB
3-PC Ball Valve investment casting for body and cap full bore Threated ends: ANSI B2.1, BS21, ISO7/1 Pressure rating: 1000PSI (PN63), Working temperature: -25C + 180C Material: CF8M, CF8, CF3M, WCB
Y-STRAINER investment casting FC threated ends: ANSI B2.1, BS21, ISO 7/1 pressure rating: 800PSI (PN40) Working temperature: -25C + 180C Material: CF8M, CF8, CF3M, WCB
SINGLE DISC WAFER CHECK VALVE (SWING) investment casting for body and disc Flanged ends: ANSI, DIN, JIS pressure rating: PN16/ANSI 150LB Working temperature: -25C + 180C Material: CF8M, CF8, CF3M, WCB
3-PC Ball valve with pneumatic Actuator valve pressure: 1000PSI (PN63) Working temperature: -25C + 180C Spring return pneumatic actuator Air pressure: 6 Bar
3-Way Ball Valve with Mounting Pad (“L”Type) investment casting for body and cap Reduce bore, “bore”, (“L”Type) Threated: ANSI B2.1, BS21, ISO7/1 Mounting Pad: ISO5211 Pressure rating: PN63(1000PSI), Working temperature: -25C + 180C Material: CF8M, CF8, CF3M, WCB
3-PC Ball Valve with Mounting Pad investment casting for body and cap Fire- safe design full bore Threated: ANSI B2.1, BS21, ISO7/1 Length: DIN 3202-M3 Mounting Pad: ISO5211 Pressure rating: PN125(2000PSI), Working temperature: -25C + 180C Material: CF8M, CF8, CF3M, WCB
• Working Pressure :10 bar for size DN40 to DN150 , 6 bar for size DN200 to DN300 , 4 bar for size DN350 to DN400
• Working Temperatre: -10°C to 120°C
• Corrosion Protection :Internal- ly and externally liquid epoxy painted.
• Size Range: DN50-DN600, 2”-24”
• Pressure Rating: PN16- PN100, Class150-Class600
• Body Material: A105, A350 LF2, A182 F304, A182 F316, WCB, CF8, CF8M metal
• seat: Stellite , tungsten car- bide, nitriding soft seal seat: PTFE, RPTFE, PEEK, NYLON
• Applicable temperature: -46°C to 427°C
• Working Pressure :10 bar for size DN40 to DN150 , 6 bar for size DN200 to DN300 , 4 bar for size DN350 to DN400
• Working Temperatre: -10°C to 120°C
• Corrosion Protection :Internal- ly and externally liquid epoxy painted.
All dimensions can be manufactured in accordance with customer’s needs. Check with CMO Valves for the general dimensions of a specific gate.
The maximum working pressure adapts to the needs of the customer in every project. These gates are designed to comply with working conditions in the place of installation.
From 150 x 150 up to 3000 x 3000
Larger sizes on request.
Check with CMO for the general dimensions of a specific penstock.
The maximum working pressure is the height of the through conduit of the penstock; since these penstocks have a 3‐side seal, the fluid would overflow above the through conduit whenever the fluid were higher than the through conduit.
The maximum working pressure adapts to the needs of the customer in every project.
These penstocks are designed to comply with working conditions in the place of installation.
From DN50 up to DN1500
Larger sizes on request.
Check with CMO Valves for the general dimensions of a TE telescopic valve.
Maximum working pressure depends on the valve stroke and is equal to the difference between the maximum and minimum level required for the pond. These units adapt to the customer’s requirements in each project, and are designed to meet the working conditions in the final location.
The maximum working pressure adapts to the needs of the customer in every project. These penstocks are designed to comply with working conditions in the place of installation.
Material: Pure flexible graphite yarn impregnated with high-temperature resin and inert lubricant Construction: InterwovenTM braid pH Range: 0 – 14 (except fuming nitric, aqua regia and molten alkali metals) Frictional Drag: Lowest of all packings Heat Dissipation: Equal to pure graphite packings Temperature Limit: -10oF to 450oF (-23oC to 232oC) Pressure Limit: 1500 psi (103 bar)
DN 4 ”/ 100 mm, 5” / 125 mm, 6 ”/ 160 mm, 8” / 200 mm, 10 ”/ 250 mm y 12” / 300 mm.
Améliorez votre filtration existante avec notre gamme de préfiltres cycloniques. Standards ou autonettoyants, ils sont une sécurité supplémentaire pour votre moteur.
• Working Pressure :Max300PSI
• Working Temperatre :0°C – 82°C
• Corrosion Protection :Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard.
• Design standards: BS 1868, ASME B16.34, DIN 3356, EN 10739
• Structural length: ASME B16.10, BS 2080, ISO 5752, DIN 3202, EN 558
• Flange connection: ASME B16.5, ASME B16. 47, DIN 2501, EN 1092
• Groove end: ASME B16.25, DIN 3239, EN 12627
• Wall thickness: ASME B16.34
• Test standard: API 598, BS EN12266, DIN 3230
material: glassfiber or Kevlar coated PTFE
• quality: premium grade
• color: brown, black, blue etc.
• surface: smooth/smooth
• temperature resist: -140°C – +260°C
• material: pure PTFE dispersion resin
• color: white, FDA grade
• adhesive: backing adhesive or not
• surface: smooth
• cross section: rectangle, round
• tensile strength: 8Mpa
• hardness: 30-70shore A
• density: 0.7-1.0g/cm3
• creep relaxation: 70%
• volatility: 1.0%
• PH: 0-14
• working pressure: 1.6Mpa in gas, 6.4Mpa in liquid
• working temperature: -168°C ~ +280°C(maximum +315°C)
• thickness: 1.5-7.0mm
• material: 60%PTFE + 40%bronze or phenolic + fabric
• pressure 1 5 M p a @ 2 5 ° C , 12Mpa@80°C, 8Mpa@120°C
• temperature: -60°C – +260°C
• speed: 15m/s
• high wearing resistance: normally 10times of cast iron guide, good accuracy maintenance
• low friction: friction coeffi- cient<0.04, only 1/3 of cast iron guide, reducing the driving-energy consumption
• no creeping: moving steadily
• material: PTFE fiber, aramid fiber, graphite, lubricant
• working press: 2-20Mpa
• working speed: 2-20m/s
• working temperature: -240°C ~ +288°C
• high density: 1.4g/cm3
• PH range: 0-14
• size: 3-50mm x 3-50mm x 5, 10, 15kgs
• terial: PTFE fiber, aramid fiber, graphite, lubricant
• material: PTFE, SS304 etc.
• filling: graphite, carbon, bronze
• quality: premium grade
• color: white, black
• surface: smooth
• tensile strength: 20-30Mpa
• hardness: 55+/-5shore D
• elongation at break: 200%
• density: 2.1-2.7g/cm3
• break down voltage: 10KV/ mm
• temp resist: -180°C – +260°C
• material: virgin PTFE
• quality: premium grade
• color: white, black, brown
• surface: smooth
• tensile strength: 20-30Mpa
• hardness: 55+/-5shore D
• elongation at break: 200%
• density: 2.1-2.3g/cm3
• break down voltage: 10KV/ mm
• temp resist: -180°C – +260°C
• material: pure PTFE expand
• tensile strength: ≥8Mpa
• elongation: ≥25%
• working pressure: 150-250kg/cm2
• density: 0.15-0.35g/cm3
• heat-resistance: +260°C
• cold-resistance: -180°C
• width: 3-100mm
• length: 5-50m
• thickness: 0.075-0.2mm
IEM manufacturers heavy duty pulley cleaners that are designed to reduce down time by preventing drop materials that build-up between the belt and pulley.
Advanced technology electric quarter turn actuator for small valves.
Most Liquiflo pumps are available with flanged ports to sim- plify piping connections. Available flanges are ANSI 150# or 300#, DIN PN16 and JIS 10K.
The Remote Control range is a family of valve actuators and associated products of the former Remote Controls AB of Sweden. These outstanding products are now backed by the vast global sales and service network of Rotork. Details of the product range are available from the links below and the menu on the left.
* ROM and ROMpak 2, 3, 4, 5, 6 & 7 actuators only
† 12/24 VDC units are -30 to +65 ºC (-22 to +149 ºF)
GHT worm gearboxes in combina- tion with SA multi-turn actuators act as multi-turn actuators with
high output torques. The torque range increases nearly fourfold when combining GHT gearboxes with SA actuators. This type of torque requirements occurs e.g. for large gate valves, weir pen- stocks or dampers.
GK bevel gearboxes in combination with SA multi-turn actuators act as multi-turn actuators with higher out- put torques. Drive shaft and output shaft are perpendicular. Thus, this combination is particularly appro- priate for implementing special au- tomation solutions. These include among others particular mounting positions or simultaneous operation of two valve stems using two GK gearboxes and a central actuator.
Duty class 1 – motor operation Lifetime for 90° swivel movement. Meets the lifetime requirements of EN 15714-2. Duty class 2 – motor operation Lifetime for 90° swivel movement for valves which are rarely operated. Duty class 3 – manual operation Meets the lifetime requirements of EN 1074-2.
GST spur gearboxes in combination with SA multi-turn actuators act as multi-turn actuators with higher out- put torques. Drive shaft and output shaft are arranged in axial offset position. Thus, this combination is particularly appropriate for imple- menting special automation solu- tions. This includes among others particular installation conditions.
The following indications serve the purpose of a rough outline. Sepa- rate data sheets are available for GST gearboxes comprising detailed information. For further reduction ratios, please contact us.
Schischek electric explosionproof products for heating, ventilating and air conditioning (HVAC) for industrial and offshore applications. Developed in conjunction with other control equipment to produce modern, reliable and proven explosionproof products utilising the latest technology.
All Schischek explosionproof products are PTB certified, approved by and produced according to the very latest standards and regulations. According to type and kind of protection, Schischek products are suitable for operating in Ex areas, zones 0, 1, 2, 21 and 22, including gases, vapours, mists and dust.
ALGA-ALGAS pneumatic scotch yoke actuators are suitable for quar- ter-turn valves up to the largest siz- es, thanks to an efficient design and to high break-out torque. The QA version with damper performs fail
stroking in less than 1 second.
The close-coupled configu- ration is the most common arrangement for sealed pumps. It makes installation easy by eliminating the need to align the pump shaft to the motor shaft in the field. Perfect pump-motor alignment and positioning is guaranteed by the precision-machined mounting bracket. Close-coupled sealed pumps include a Cast Iron mounting bracket and flexible drive coupling ready to mate to a motor of your choice. The removable door on the mounting brack- et allows for easy accessibility to the coupling or seal area of pump for servicing or seal replacement. These pumps can also be furnished from the factory with any type of motor, vari- able speed drive or gear reducer.
Segmented Ball Valves provide high capacity, precise control across a broad range of appli- cations. They are similar to a conventional ball valve, but with a contoured V-notch segment in the ball. This control valve has good rangeability, control, and shutoff capability. The V-notch ball provides positive shearing action and produces an inherent equal percentage flow character- istic.
DN50 to DN1200 (larger sizes to order).
• Size Range:2” – 20” (50mm – 500mm)
• Body Style:Wafer & Flanged Long Body
• Temperature Range:-20°F to 300°F (-29°C to 150°C)
• Pressure Ratings:230 psi (16 Bar)
• Body Materials:Ductile Iron, Stainless Steel
• Disc Materials:Chrome-Molly Iron (Hardened), PSZ Ceramic (Partially Stabilized Zirconia)
• Stem Materials:Stainless Steel
• Size Range:2-36” (50-900mm)
• Pressure Rating:Up to 24” (600mm) 150psi (10bar)
• 30-36” (750-900mm) 100psi (7bar)
• Body Style:Single Piece, Wafer, Lug
• Seat Options: Buna-N: -35°-194°F / -37°-90°C
• EPDM: -65°-248°F / -54°-120°C
• Viton®: -15°-392°F / -26°-200°C
• PTFE: -235°-450°F / -148°-232°C
• Packing Options:
• PTFE: 232°C / 450°F
• Elastomer
• Quad Seal: Nitrile: 90°C / 194°F
• Viton®: 200°C / 392°F
• Size Range:2-24” (50-600mm)
• Pressure Rating:150psi (10bar), 240psi (16bar), 300psi (20bar)
• Body Style:Wafer, Two-Piece Bolted
• Seat Options: Buna-N: -35°-194°F / -37°-90°C
• EPDM: -65°-248°F / -54°-120°C
• Viton®: -15°-392°F / -26°-200°C
• Packing Options: PTFE: 232°C/450°F
• Elastomer Quad Seal: Nitrile: 90°C/194°F
• Viton®: 200°C/392°F
• Design: MSS SP-81
• Testing: MSS SP-81
• Face to Face: MSS SP-81
Severe Service Ball Valves have a simplistic, two-piece floating ball design with integral met- al seat meant to provide tight shutoff in high temperature, high pressure, and erosive appli- cations across all industries.
NEC Explosion proof for Class I, Div. I hazardous areas
This product is only intended for use in large-scale fixed installations excluded from the scope of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2).
• material: 100% virgin silicone material
• quality: industrial grade, food grade
• color: translucent, dark red, black, milk white, blue, grey etc.
• surface: smooth
• tensile strength: 7.5-9.8Mpa
• hardness: 30, 40, 50, 60, 70, 80+/-5shore A
• elongation: 350-720%
• density: 1.25g/cm3
• tear strength: 26-42N/mm
• working temperature: -60°C – +250°C
• cell: closed cell
• material: virgin silicone sponge
• color: dark red, white, grey, black, beige, brown, blue etc.
• surface: double impression fabric
• tensile strength: 100-200PSI
• hardness: 10, 15, 20, 25, 30, 35, 40+/-5shore A (currently 20-25shore A)
• elongation: 100%
• density: 0.5-1.0g/cm3
• working temperature: -60°C – +220°C(moment 260°C)
• thickness: 1.5-50mm
• width: 0.1-1.5m(maximum 1.5m@more than 5mm thick- ness)
• length: 0.1-10m
SM-1700
SM-5000
SA multi-turn actuators com- bined with GF gearboxes act as lever actuators. Lever gearboxes are derived from GS part-turn gearboxes wi- thregard to design. Various reduction ratios are achieved by integratingprimary reduc- tion gearings. The following indications serve the purpose of a rough outline. Please refer to the separate data sheets for more detailed informa- tion. Gearboxes provided for modulating applications are equipped with a worm wheel made of bronze. The nominal torque is reduced for this ver- sion.
By mounting a lever and a base, the SQ actuator turns into a lever actuator. The technical data of these lever actuators is identical to that of the part-turn actuators, in- cluding, for example, the max- imum permissible number of starts. On the right, please find the data for lever actua- tors equipped with 3 phase AC motors. Operating times apply for 90° swing angle.
Construction: Plaited from pre- mium grade, long-line, high ten- sile strength ramie/flax yarn and sealed with a superior water- proof, tallow base lubricant. pH Range: 6 – 9 (Brines, cold wa- ter and oils) Temperature Limit: -10oF to 200oF (-23oC to 93oC) Pressure Limit: 150 psi (10 bar) Shaft Speed: 1000 fpm Service: Designed particularly for marine stern tubes, bilge pumps and rudder posts.
Material: PTFE Impregnated Syn-TexTM Construction: InterwovenTM braid pH Range: 2 – 12 Pressure Limit: 500 psi (34 bar) Shaft Speed: 2300 fpm (11.7 m/s) Temperature Limit: -10oF to 450oF (-23oC to 232oC)
Material: Aramid filament heavily impregnated with TFE suspensoid and saturated with inert lubricant
Construction: InterwovenTM braid Abrasion Resistance: Most wear resistant packing available pH Range: 3 – 11 Pressure: 500 psi (3000 psi in plunger pumps) Surface Speed: 2500 fpm (12.7 m/s) Temperature Range: -10°F to 500°F (-23°C to 260°C) Tensile Strength: 400,000 psi (27,580 bar)
Material: Heat dissipating ePTFE/Graphite body with abrasive-resistant Aramid fiber corners Construction: InterwovenTM braid pH Range: 3 – 11 Pressure Limit: 700 psi (2500 psi in plunger pumps) Shaft Speed: 2700 fpm (13.7 m/s Temperature Limit: -10°F to 500°F (-23°C to 260°C)
Material: (an inert silicone softener/lubricant is used in style 1367S; mineral oil lubricant in 1367FS; no lubricant in style 1367H). Construction: InterwovenTM braid Temperature Limit: -400oF to 500oF (-240oC to 260oC) Pressure Limit: 250 psi for styles 1367S & 1367FS 2000 psi for style 1367H pH Range: 0 – 14 Shaft Speed: 1200 fpm (7 m/s)
Material: Meta-Aramid/PTFE with inert lubricant Construction: InterwovenTM braid Temperature: -10°F to 550°F (-23°C to 288°C) pH Range: 1 – 14 Pressure Limit: 500 psi Shaft Speed: 2000 fpm
Material: Pure 99% assay graphite filament with a fine graphite particle impregnation Construction: InterwovenTM braid Temperature Limit: 1200oF (650oC) in steam 800oF (427oC) in oxidizing atmospheres 6000oF (3300oC) in non-oxidizing atmo- spheres pH Range: 1 – 14 (all fluids except strong oxidizers in the 1 – 2 pH range, such as oleum, fluorine, fuming nitric acid and aqua regia) Pressure Limit: 500 psi (pumps) 3500 psi (valves) Shaft Speed: 4000 fpm (20.3 m/s
Material: PTFE impregnated 95% assay carbon yarn Construction: InterwovenTM braid Temperature Limit: -400°F to 600°F (-240°C to 315°C) pH Range: 1 – 14 Pressure Limit: 500 psi Shaft Speed: 3000 fpm
Construction: Plaited from pre- mium grade, long-line, high ten- sile strength ramie/flax yarn and sealed with a superior water- proof, tallow base lubricant. pH Range: 6 – 9 (Brines, cold wa- ter and oils) Temperature Limit: -10oF to 200oF (-23oC to 93oC) Pressure Limit: 150 psi (10 bar) Shaft Speed: 1000 fpm Service: Designed particularly for marine stern tubes, bilge pumps and rudder posts.
• Working Pressure :16 bar for Size DN50 to DN600. 25 bar for Size DN50 to DN300.
• Working Temperatre :-10°C to 120°C for Bronze or EPDM disc sealed ring. -10°C to 82°C for NBR disc sealed ring.
• Corrosion Protection :Internal- ly and externally liquid epoxy painted or fusion bonded ep- oxy powder coated (FBE).
• Working Pressure :16 bar for Size DN50 to DN600. 25 bar for Size DN50 to DN300.
• Working Temperatre :-10°C to 120°C for Bronze or EPDM disc sealed ring. -10°C to 82°C for NBR disc sealed ring.
• Corrosion Protection :Internal- ly and externally liquid epoxy painted or fusion bonded ep- oxy powder coated (FBE).
Three-Way Valves are a type of globe valve that have three pipeline connections to provide converging (flow-mixing) or di- verging (flow-splitting) service. Variations include cage-, port-, and stem-guided designs, selec- tions for high-temperature ser- vice, and end connections can be specified to mate with most piping schemes.
The Type 1098 regulators are capable of providing accurate, fast response and high-ca- pacities in low-pressure drop systems. Typical applications include: inert gas and plant air headers.
The Type 63EG-98HM is a com- pact, fast response, high accu- racy relief valve/backpressure which is suitable for gas or liq- uid service. The valve’s design makes it ideal for pump recir- culation especially in skid pack- ages where space is limited. Available constructions include units suitable for sea water ap- plications.
Products:
See Main Type K Catalogue for further details.
the 2-Series Mag-Drive Gear Pumps were designed for low-flow applications. Their compact and rugged design makes them ideal for many applications, including chemical dosing and metering, pipeline sampling and wastewater treatment. The 2-Series pumps are available in corrosion-resistant 316 SS construction and deliver flows up to approximately 30 GPH (0.5 GPM) at differential pressures up to 225 PSI.
Designed for applications such as:
From DN50 up to DN1200
• Size range: 2”-48”
• Pressure class: Class150- Class2500
• Body material: WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, CN7M
• Internal material: F6a, F304, F304L, F316, F316L , F51, Monel
• temperature: -180°C to 425°C
• Working Pressure :16 bar for Size DN50 to DN600. 25 bar for Size DN50 to Dn300.
• Working Temperatre :-10°C to 120°C
• Corrosion Protection :Internal- ly and externally liquid epoxy painted or fusion bonded ep- oxy powder coated (FBE).
