Knife Gate Valve – Serie T
Sizes
De DN50-2″ to DN1200-24″
Larger sizes on request.
Working pressures
- DN50‐2″ – DN600‐24″ = 10 bar
- DN700‐28″ – DN800‐36″ = 6 bar
- DN900‐40″ – DN1200‐48″ = 4 bar
The mentioned working pressures are just valid for the pressures applied on the direction of the arrow market on the body. As the valve is designed with gate support guides, the valves are able to support a 30% of these pressures from the opposite direction without any damage on them. In these cases, the valves are not 100% water tight. To obtain total water tightness in these conditions, it is necessary to incorporate additional supports.
Slurry Knife Gate Valve
Unidirectional “LUG” guillotine slurry knife gate valve, designed in accordance with standards TAPPI TIS 405‐8 and MSS‐SP‐81.
Monobloc cast body with interior slides for optimum movement of the gate during operation.
Provides high flow rates with low pressure drop. Various seat and packing materials available.
Face‐to‐face dimension in accordance with TAPPI standard.
Utilization
- This guillotine valve is suitable to work with liquids with a maximum concentration of solids of 6%.
- Bulk transport ‐ Draining plants ‐ Paper industry ‐ Water treatment.
- Chemical plants ‐ Food sector ‐ Mining
Reviews
There are no reviews yet.