Butterfly Valve – 25A
₮0.00Sizes
DN50 – DN300
Working pressures
Approved for pressures up to 16 bar
-
-
Butterfly Valve – Serie MP
₮0.00Sizes
Dimensions, materials, design pressure and tightness adapted to customer´s requirements Actuators: Pneumatic, Electric, Hydraulic
-
-
-
Check Valve – Serie RT
₮0.00Sizes
From DN150 to DN2000.
Larger sizes on request.Working pressures
The differential pressure (ΔP) these valves can work at is highly variable, which is why design is in accordance with the requirements in each specific project. They can be designed to withstand high pressures.
-
Check Valves – Serie R
₮0.00Sizes
DN50 a DN1200
Larger sizes on request.
Working pressures
- DN40 – DN250: max. PN40
- DN300 – DN600: max. PN25
- DN700 – DN1200: max. PN16
-
Damper – Serie GC
₮0.00Sizes
From 125 x 125 up to 3000 x 3000
Larger sizes on request.
Check with CMO Valves for the general dimensions of a specific damper.
Working pressures
Maximum standard work pressure is 0.5 bar ; greater pressures upon request.
-
Damper – Serie GR
₮0.00Sizes
From DN 150 up to DN 3000
Larger sizes on request.
Check with CMO Valves for the general dimensions of a specific damper.
Working pressures
- Maximum standard work pressure is 0.5 bar ; greater pressures upon request.
-
-
Damper – Serie MF
₮0.00Sizes
From DN 80 up to DN 3000
Larger sizes on request.
Check with CMO Valves for the general dimensions of a specific damper butterfly.
Working pressures
-
The most significant difference between the ML and MF series is the differential working pressure (ΔP). For lower pressures, choose the ML series (Light Butterfly); for higher pressures, choose the MF series..
- Maximum standard work pressure is 0.5 bar; greater pressures upon request.
-
-
Damper – Serie ML
₮0.00Sizes
From DN 80 up to DN 3000
Larger sizes on request.
Check with CMO Valves for the general dimensions of a specific damper butterfly.
Working pressures
The most significant difference between the ML and MF series is the differential working pressure (ΔP).
For lower pressures, choose the ML series (Light Butterfly);
For higher pressures, choose the MF series.
Maximum standard work pressure is 0.5 bar greater pressures upon request. -
-
-
-
Knife Gate Valve – Serie AD
₮0.00Utilization
Paper Industry
MiningChemical
BumpingFood
IndustryWater treatmentSizes
DN50 a DN2000
bigger diameters under request.Working pressures
- DN 50 – DN250 = 10 bar
- DN 300 – DN400 = 6 bar
- DN 450 = 5 bar
- DN 500 – DN600 = 4 bar
- DN 700 – DN1200 = 3 bar
-
Knife Gate Valve – Serie B
₮0.00Sizes
DN50 to DN600
(Bigger sizes under request).
Working pressures
- DN50-DN250 = 10 bar
- DN300-DN400 = 6 bar
- DN450 = 5 bar
- DN500-DN600 = 4 bar
- DN700-DN1000 = 3 bar
-
Knife Gate Valve – Serie C
₮0.00Sizes
From 125×125 to 1400×1400.
Also available in rectangular designs.
Larger sizes on request.
Working pressures
Standard: 0,6 bar
For larger pressures, consult CMO Valves.
-
Knife Gate Valve – Serie D
₮0.00Sizes
DN50 a DN1200
Larger sizes to order.Working pressures
PN 2,5 to PN 100
Each valve is designed according to work conditions -
Knife Gate Valve – Serie E
₮0.00Sizes
DN50 a DN1200
(Larger sizes to order)
Working pressures
- DN50 -DN450 = 7 bar
- DN500 – DN1200 = 4 bar
-
Knife Gate Valve – Serie F
₮0.00Sizes
DN50 a DN1200
Larger sizes on request.
Working pressures
- DN50 – DN250 = 10 bar
- DN300 – DN400 = 6 bar
- DN450 = 5 bar
- DN500 – DN600 = 4 bar
- DN700 – DN1200 = 3 bar
-
Knife Gate Valve – Serie FK
₮0.00Sizes
- DN50 a DN1200
- (Larger sizes on request).
Working pressures
- DN 50 – DN 250 = 10 bar
- DN 300 – DN 400 = 6 bar
- DN 450 = 5 bar
- DN 500 – DN 600 = 4 bar
- DN 700 – DN 1200 = 3 bar
-
Knife Gate Valve – Serie GA
₮0.00Sizes
DN50 a DN1500
Larger sizes to order.Working pressures
- DN50-DN150 = 16 bar
- DN200-DN600 = 10 bar
- DN700-DN900 = 8 bar
- DN1000-DN1200 = 6 bar
The pressures indicated in the table can be used in either of the valve’s two directions.
-
Knife Gate Valve – Serie GD
₮0.00Sizes
Standard manufacturing sizes:
From DN50 up to DN1500
Bigger diameters under request.Working pressures
- DN50-DN150 = 16 bar
- DN200-DN600 = 10 bar
- DN700-DN900 = 8 bar
- DN1000-DN1200 = 6 bar
The pressures indicated in the table can be used in either of the valve’s two directions.
-
Knife Gate Valve – Serie GH
₮0.00Sizes
ND80‐3″ to ND900‐36″
(Larger sizes on request).
Working pressures
- ASA 150 DN80 – DN600 = 21 bar
- PN 25 DN80 – DN600 = 25 bar
- ASA 300/PN40 DN80 – DN600 = 40 bar
The pressures indicated in the table can be used in either of the valve’s two directions.
-
Knife Gate Valve – Serie GL
₮0.00Sizes
DN50 to DN1500
Bigger sizes under requestWorking pressures
- DN50 – DN150 = 16 bar
- DN200 – DN600 = 10 bar
- DN700 – DN900 = 8 bar
- DN1000 – DN1200 = 6 bar
The pressures indicated in the table can be used in either of the valve’s two directions.
-
Knife Gate Valve – Serie K
₮0.00Sizes
- ND50 to ND2000
- (larger sizes on request).
Working pressures
- DN50 – DN150 = 10 bar
- DN200 = 8 bar
- DN250 – DN300 = 6 bar
- DN 350 – DN400 = 5 bar
- DN450 – DN600 = 3 bar
- DN700 – DN1400 = 2 bar
-
Knife Gate Valve – Serie L
₮0.00Sizes
- DN50 to DN2000
- (larger sizes on request).
Working pressures
- DN 50 – DN 250 = 10 bar
- DN 300 – DN 400 = 6 bar
- DN 450 = 5 bar
- DN 500 – DN 600 = 4 bar
- DN 700 – DN 1400 = 3 bar
-
Knife Gate Valve – Serie T
₮0.00Sizes
De DN50-2″ to DN1200-24″
Larger sizes on request.
Working pressures
- DN50‐2″ – DN600‐24″ = 10 bar
- DN700‐28″ – DN800‐36″ = 6 bar
- DN900‐40″ – DN1200‐48″ = 4 bar
The mentioned working pressures are just valid for the pressures applied on the direction of the arrow market on the body. As the valve is designed with gate support guides, the valves are able to support a 30% of these pressures from the opposite direction without any damage on them. In these cases, the valves are not 100% water tight. To obtain total water tightness in these conditions, it is necessary to incorporate additional supports.
-
Knife Gate Valve – Serie U
₮0.00Sizes
From DN50 up to DN800
(Larger sizes on request)Working pressures
- DN 50 – DN 250 = 10 bar
- DN 300 – DN 400 = 6 bar
- DN 450 = 5 bar
- DN 500 – DN 600 = 4 bar
- DN 700 – DN 800 = 3 bar
-
Knife Gate Valve – Serie UB
₮0.00Sizes
- DN50 to DN2000
- (Other dimensions to order).
Working pressures
- DN50 – DN250 = 10 bar
- DN300 = 7 bar
- DN350 – DN400 = 6 bar
- DN450 = 5 bar
- DN500 – DN600 = 4 bar
- DN700 – DN1400 = 3 bar
- DN1600 – DN2000 = 2 bar
-
Knife Gate Valve Serie XB
₮0.00Sizes
Standard manufacturing sizes: From DN50 up to DN600
Working pressures
DN 50 – DN600 = 10 bar
-
Penstock – Serie AT
₮0.00Sizes
All dimensions can be manufactured in accordance with customer’s needs. Check with CMO Valves for the general dimensions of a specific gate.
Working pressures
The maximum working pressure adapts to the needs of the customer in every project. These gates are designed to comply with working conditions in the place of installation.
-
Penstock – Serie CA
₮0.00Sizes
From 150 x 150 up to 3000 x 3000
Larger sizes on request.
Check with CMO for the general dimensions of a specific penstock.
Working pressures
The maximum working pressure is the height of the through conduit of the penstock; since these penstocks have a 3‐side seal, the fluid would overflow above the through conduit whenever the fluid were higher than the through conduit.
-
-
Penstock – Serie MC
₮0.00Sizes
- From 150 x 150 up to 3000 x 3000
- Larger sizes on request.
- Check with CMO Valves for the general dimensions of a specific wall penstock.
Working pressures
The maximum working pressure adapts to the needs of the customer in every project.
These penstocks are designed to comply with working conditions in the place of installation. -
Penstock – Serie MR
₮0.00Sizes
- From DN150 up to DN3000
- Larger sizes on request.
- Check with CMO Valves for the general dimensions of a specific wall penstock.
Working pressures
- The maximum working pressure adapts to the needs of the customer in every project.
- These penstocks are designed to comply with working conditions in the place of installation.
-
Penstock – Serie MX
₮0.00Sizes
- From 150 x 150 up to 1200 x 1200
- Larger sizes on request.
- Check with CMO Valves for the general dimensions of a specific wall penstock.
Working pressures
- La presión de trabajo máxima, se adapta a las necesidades que tiene el cliente en cada proyecto.
- Estas compuertas se diseñan para que cumplan con unas condiciones de servicio acordes a la obra donde vayan a ser instaladas.
-
Penstock – Serie MZ
₮0.00Sizes
- From DN150 up to DN1200
- Larger sizes on request.
- Check with CMO Valves for the general dimensions of a specific wall penstock.
Working pressures
- The maximum working pressure adapts to the needs of the customer in every project.
- These penstocks are designed to comply with working conditions in the place of installation.
-
Penstock – Serie RE
₮0.00Utilization
- The overflow gate valve is used to control the level of fluids in tanks.
- It also can be used to discharge by overflow solids and foams that are floating in the surface of the liquids
-
Penstock – Serie TE
₮0.00Sizes
From DN50 up to DN1500
Larger sizes on request.
Check with CMO Valves for the general dimensions of a TE telescopic valve.
Working pressures
Maximum working pressure depends on the valve stroke and is equal to the difference between the maximum and minimum level required for the pond. These units adapt to the customer’s requirements in each project, and are designed to meet the working conditions in the final location.
-
Penstock – Serie VM
₮0.00Sizes
- From 150×150 mm to 3000×3000 mm (bigger dimensions under request)
- For overall dimensions of the wagon type penstock, please check it with CMO.
Working pressures
The maximum working pressure adapts to the needs of the customer in every project. These penstocks are designed to comply with working conditions in the place of installation.
-
PNEUMATIC ACTUATOR
₮0.00Sizes
DN 4 ”/ 100 mm, 5” / 125 mm, 6 ”/ 160 mm, 8” / 200 mm, 10 ”/ 250 mm y 12” / 300 mm.
-
Serie FL
₮0.00Sizes
- The construction sizes for this type of penstocks are adapted to the needs of each particular project.
Working pressures
- As is the case with the dimensions of the penstock, the working ΔP is also adapted in accordance with the specific needs of each project.
-
Serie TD
₮0.00Sizes
DN50 to DN1200 (larger sizes to order).
Working pressures
- DN 50 – DN 250 = 10 bar
- DN 300 – DN 400 = 6 bar
- DN 450 = 5 bar
- DN 500 – DN 600 = 4 bar
- DN 700 = 3 bar
- DN 800 – DN 1200 = 2 bar
-
Unidirectional Knife Gate Valve
₮0.00Utilization
Designed for applications such as:
- Paper Industry
- Mining
- Silo emptying
- Chemical plants
- Bumping Food
- Industry Sewage treatment.
Sizes
From DN50 up to DN1200
Working pressures
- DN 50 – DN250 = 10 bar
- DN 300 – DN400 = 6 bar
- DN 450 = 5 bar
- DN 500 – DN600 = 4 bar
- DN 700 – DN1200 = 3 bar