FLOMAX INTERNATIONAL – ctsolutions.mn

AUTOMATIC SHUTOFF FUEL NOZZLES
₮0.00
Flomax Fuel Nozzles connect to all standard fuel receivers. The FN600 fuel nozzle has latching dogs and the FNBL fuel nozzle uses a ball lock design. Both nozzles come with an optional ball bearing 1 1⁄2” NPT swivel. An available plug is specially designed to seal out dirt and contaminants and is attached with a S/B 1/8′′ coated wire lanyard. A patented removable piston assembly allows the cylinder to be easily removed for rebuilding. Nozzles can be performance adapted to specific user requirements.
• FNBL Diesel Fuel Nozzle
• Nozzle Length: 11 inches
• Nozzle Weight: 6.6 lbs
• Nozzle Swivel Thread: 1.5 NPT
• Standard shutoff set at 8.0 PSI (FloMAX nozzles can be set from 5.5 PSI shutoff to 13.00 PSI shutoff as required) Working pressure – 125 PSI Burst pressure – 250 PSI

Үнийн санал
BULK FUEL NOZZLE
₮0.00
The FloMAX Bulk Fuel Nozzle has been designed to transfer large volumes of fuel at high flow rate using existing standard 1 1⁄2” fuel receivers. While best results will be obtained using a FloMAX FRA, FRS, or FR-RS fuel receiver, the BFN is completely compatible with all industry standard fuel receivers.
The BFN has a push-to-connect design that releases from the receiver with a gentle pull on the pullback or the poly coated stainless steel lan- yard. This is a dry break nozzle that uses the same poppet and vulcanized Viton seal valve sleeve as the FloMAX FN600 and FNBL fuel nozzles. The BFN is an excellent option when high fuel flow is required, but auto shutoff isn’t. The FRX-BFN connects to the FRX 2′′ fuel receiver. It has all the same design features as our standard BFN.

Үнийн санал
FLOMAX 3/4′′ SERIES CONNECTORS
₮0.00
Flomax 3/4′′ Series connectors consist of 6 color-coded non-interchangeable nozzle and receiver sets. The proprietary design helps prevents cross-contamination of fluids of non-mating connectors. The connectors are manufactured using 100% metal components. All wear components are stainless steel and the non-wear components are aircraft grade anodized aluminum. The billet aluminum caps are O-Ring sealed for greater contaminant resistance.
• 200 psi working pressure
• 500 psi burst pressure rated
• Maximum flow rate of 45 gpm at 70 PSI

Үнийн санал
FLOMAX HIGH FLOW SERIES CONNECTORS
₮0.00
Flomax High Flow Series connectors consist of 7 color-coded non-interchangeable nozzle and receiver sets. The proprietary design helps prevents cross-contamination of fluids of non-mating connectors. The connectors are manufactured using 100% metal components. All wear components are stainless steel and the non-wear components are aircraft grade anodized alumi- num. The billet aluminum caps are O-Ring sealed for greater contaminant resistance.

• Maximum flow rate of 113 gpm (using ISO 46 hydraulic oil)
• 500 psi working pressure
• 1500 psi burst pressure rated
• 1′′ NPT male & female threaded connectors

Үнийн санал
FLOMAX STANDARD COOLANT AND ENGINE CONNECTORS
₮0.00
Flomax Standard Series Coolant and Engine con- nectors are fully compatible and interchangeable with industry standard connectors. The caps, plugs, and connectors are 100% metal, manu- factured using aircraft grade anodized aluminum and stainless steel. The color-coded and labeled mating components provide for quick positive identification.

Үнийн санал