• United brass works

    Model 226UT Y-Blow Off Valve

    ₮0.00

    Complies with MSS-SP-80-2013
    200 WSP at 406° Max
    400 WOG
    Non-Shock Service
    100% Pressure Tested
    Threaded Ends
    Rising Stem
    Swivel Disc Holder
    PTFE Disc
    Integral Seat
    Max Pressure for Boiler Blow-Off 160 PSI
    *Contains lead. Not for use in water systems intended for human consumption*

    Care must be taken in blow off piping so that no water hammer effect causes shock to the “Y” blow off valve, especially in cases where a boiler has two blow down lines. In such cases both lines should be piped to a common set of blow down valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.

    Үнийн санал Done
  • United brass works

    Model 325U Y-Blow Off Valve

    ₮0.00

    Complies with MSS-SP-80-2013
    Class 300
    Non-Shock Service
    100% Pressure Tested
    Threaded Ends
    Rising Stem
    Swivel Disc Holder
    Seat & Disc 400-500 Brinnell Stainless Steel
    Max Pressure 390 PSI @ 500 F
    Max Pressure for Boiler Blow-Off 312 PSI

    Care must be taken in blow off piping so that no water hammer effect causes shock to the “Y” blow off valve, especially in cases where a boiler has two blow-off lines. In such cases both lines should be piped to a common set of blow off valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.

    Үнийн санал Done